Erle Robotics: Introduction to Networking in Linux
Book
This book presents an introduction to networking in Linux, using Erle-brain. Erle is a small-size Linux computer for making drones.
Throught this tutorial you will learn the basics about networking, concepts such as host or DNS, the usual commands in Linux networking and their functions...
About
For years we've been working in the robotics field, particularly with drones. We have passed through different Universities and research centers and in all these places we actually found that most of the drones are black boxes (check out our 60s pitch). Not meant to be used for learning, research. The software they use is in most of the cases unknown, closed source or not documented. Given these conditions, how are we going to educate the next generations on this technologies? How do you get started programming drones if you don't have $1000+ budget? Which platform allows me to get started with drones without risking a hand?
We are coming up with an answer to all these questions, our technology at Erle Robotics and our drones brain: Erle-brain.
Inspired by the BeagleBone development board, we have designed a small computer with about 36+ sensors, plenty of I/O and processing power for real-time analysis. Erle is the enabling technology for the next generation of aerial and terrestrial robots that will be used in cities solving tasks such as surveillance, enviromental monitoring or even providing aid at catastrophes.
Our small-size Linux computer is bringing robotics to the people and businesses.
License
Unless specified, this content is licensed under the Creative Commons Attribution-NonComercial-Share Alike 3.0 Unported License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ or send a letter to Creative Commons, 171 Second Street, Suite 300, San Francisco, California, 94105, USA.
All derivative works are to be attributed to Erle Robotics S.L.. For a list of authors refer to erle_gitbook/graphs/contributors.
For any questions, concerns, or issues submit them to support [at] erlerobot.com.